LW200 L4-2.2L VIN F (2003)
12. Install Steering Wheel Puller Bridge J1859A (or equivalent) and Steering Wheel Puller Legs J42578 (or equivalent).
13. Remove steering wheel while feeding the wiring through the wheel opening.
NOTICE: Always align the front wheels to the straight-ahead position when installing or removing a roll connector.
NOTICE: If yellow tab is not available, use tape to prevent SIR coil from rotating.
14. Insert yellow tab or use a piece of tape to prevent rotating the SIR coil.
DISASSEMBLY
1. Remove screws from steering wheel shroud.
NOTICE: Cruise control switches must be removed from the rear. Do not attempt to pry them out from front as damage to steering wheel may occur.