LW200 L4-2.2L VIN F (2003)
Fluid - A/T: Service and Repair
Transmission Fluid Checking Procedure
Caution When Checking Hot Transmission Fluid through Drain Plug Hole
The engine must be running when the transmission fluid fill plug is removed, or excessive fluid loss will occur. Transmission fluid may be hot. Since
the actual fluid level is unknown, stand clear when removing the fill plug. Have a container ready to capture any lost fluid. Do not turn the engine off
with the fill plug removed, as you can be injured by hot transmission fluid being expelled out of the oil fill opening.
Transmission Fluid Checking Procedure
4T40-E / 4T45-E: The oil level control plug (65) is located on the torque converter side of the transmission