LW300 V6-3.0L VIN R (2001)
8. Loosen water pump pulley and power steering pump pulley attachment bolts. The accessory drive belt tension provides resistance to enable
loosening of water pump pulley bolts. Do not remove bolts at this time.
9. Install Engine Support Fixture (3 Bar) SA9105E and Engine Support Fixture Adapter J43405 to support engine weight.
IMPORTANT: Removal of accessory drive belt requires removal of right front engine mount.
10. Remove accessory drive belt.
IMPORTANT: Use caution with releasing retaining tabs to reduce risk of breakage when removing wiring harness cover.
11. Release plastic retaining tabs on wiring harness channel on front cover and remove cover.
12. Note wiring harness routing.
13. Remove wiring harness from channel.
14. Remove water pump pulley bolt.