Outlook AWD V6-3.6L (2008)
Accelerator Pedal Position Sensor: Service and Repair
Accelerator Pedal Position Sensor Replacement
Removal Procedure
1. Remove the left instrument panel insulator.
2. Remove the steering column opening filler.
3. Remove the instrument panel wiring harness electrical connector (2) from the accelerator pedal position (APP) sensor assembly.
Important: Due to clearance issues, the upper attachment bolt cannot be removed from the APP sensor assembly. Loosen the bolt
completely and leave the bolt in the component until the assembly is removed from the vehicle.
4. Remove the APP sensor bolts and sensor assembly from the vehicle.
Installation Procedure