RELAY AWD V6-3.5L VIN 8 (2005)
33. Install the bolts (1) and tighten as follows:
^
Tighten the M8x40 case bolt (1) to 32 Nm (24 ft. lbs.).
^
Tighten the M10x60 case bolts (2) to 60 Nm (44 ft. lbs.).
^
Tighten the M10x50 case bolt (3) LY7 only to 60 Nm (44 ft. lbs.).
^
Tighten the M10x75 case stud bolts (4) LY7 only to 60 Nm (44 ft. lbs.).
34. Install the hose and clamp (1), vent hose (2), and bolt (3).
^
Tighten the vent hose/speed sensor bolt to 30 Nm (22 ft. lbs.).
35. Install the transmission oil drain plug (1) and gasket.
^
Tighten the drain plug to 32 Nm (24 ft. lbs.).