RELAY AWD V6-3.5L VIN L (2006)
Door Module: Service and Repair
DOOR MODULE REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the door trim panel.
2. Remove the water deflector.
3. Remove the front door speaker.
4. Disconnect the door wiring harness from the body harness.
5. Disconnect the sash from the glass by squeezing the tabs on both of the glass attachment clips at the same time. With the tabs pressed down, slide
the sash in the direction of the snap tabs until the sash clips clear the glass attachment clips.
6. Slide the glass (1) full up and tape in place to the door window frame (2).
7. Remove the 3 door to latch (2) screws.
8. Remove the outside handle from the door, including the disconnecting rod.
