RELAY AWD V6-3.9L (2007)
2. Disconnect the negative battery cable.
3. Remove the left sheet metal diagonal brace.
4. Loosen the air cleaner cover screws and remove the cover (1) from the air cleaner assembly (3).
5. Disconnect the engine harness electrical connectors (4) from the ECM.
6. Remove the ECM (2) from the air cleaner cover.
Installation Procedure
1. Connect the engine harness electrical connectors (4) to the ECM.
2. Install the ECM (2) to the air cleaner cover.
3. Install the air cleaner assembly cover.
Notice: Refer to Fastener Notice.
4. Install the air cleaner cover (1) to the air cleaner assembly (3) and tighten the cover screws.
Tighten the screws to 4 N.m (35 lb in).