RELAY AWD V6-3.9L (2007)
Power Steering Line/Hose: Service and Repair
Power Steering Cooler Pipe/Hose Replacement
Power Steering Cooler Pipe/Hose Replacement
Removal Procedure
1. Turn the steering wheel to the straight forward position, support it from movement, and remove the key from the ignition.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the right side engine splash shield.
4. Place the drain pan under the vehicle.
5. Remove the 2 routing clip retainers from the RH side of the front cradle.
6. Remove the 2 routing clip retainers from the front side of the front cradle.