RELAY FWD V6-3.9L VIN 1 (2006)
3. Install the intake manifold cover.
4. Install and tighten the engine mount strut to engine mount strut bracket through bolt (3) and nut (4).
Tighten the bolt/nut to 48 Nm (36 ft. lbs.).
Engine Support Fixture
Engine Support Fixture
Tools Required
^
J 28467-34 Lift Hook Wing Nut and Washer (2)
^
J 28467-6A Bracket Assembly (2)
^
J 28467-7A Bolt Hook (2)
^
J 28467-500 Engine Support Fixture
^
J 28467-B Universal Engine Support Fixture
^
J 45057 Engine Support Bar Assembly
Installation Procedure
1. Remove the right engine mount strut.
2. Install the J 45057 to the right engine mount strut bracket (1).