RELAY FWD V6-3.9L VIN 1 (2006)
Fuse Block: Service and Repair
Instrument Panel Electrical Center or Junction Block Replacement
INSTRUMENT PANEL ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the instrument panel (I/P) right side endcap cover.
3. Remove the I/P compartment.
4. Remove the 2 forward screws (1) securing the I/P accessory wiring junction block assembly to the I/P carrier.
5. Remove the 2 nuts (1) securing the I/P accessory wiring junction block assembly bracket (2) to the I/P carrier.
