saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Exterior Moulding / Trim > < Campaign - Trunk Lock Assembly|Page 7933
Page 13
background image

CORPORATION NO.:
381501

SUBJECT:
Rear Compartment Key Not Returning to Full-Vertical Position When Opening Rear Compartment with Key (Replace Lid Lock, Cover)

MODELS
AFFECTED:
All 1991 and 1992 SC Coupes, and 1993 SC1 and SC2 Coupes up to, and including VIN PZ143666.

CONDITION:
Some of Saturn Coupes may have a concern about the rear compartment key cylinder not returning to full-vertical position when opening the rear
compartment with the key.

CAUSE:
Lid lock cylinder rod may contact the rear compartment lid lock cover.

CORRECTIVE
ACTION:
Replace the rear compartment lid lock cover, with a new rear compartment lid lock cover, according to the following procedure.

PROCEDURES

1.

Open rear compartment lid.

2.

Using a screwdriver, pry the rear compartment lid lock cover from the rear compartment lid lock assembly.

3.

Install new rear compartment lid lock cover (P/N 21097060) by pushing it into position.

4.

Verify that the key now returns to the full-vertical position without contacting the rear compartment lid lock cover.

PARTS
REQUIREMENTS:
21097060 

Rear Compartment Lid Lock Cover

CLAIM
INFORMATION:
To receive credit for this repair, submit a claim through the Saturn Dealer System as follows:

Labor

Case

Operation

Type

Description

Code

Time

VW

Remove and Replace Rear

T9639

0.2 hrs

Compartment Lid Lock Cover

Exterior Moulding / Trim > < Campaign - Trunk Lock Assembly|Page 7933