SC2 L4-1.9L DOHC VIN 7 (1996)
17. Remove front bracket-to-compressor bolt and position A/C compressor between brackets.
18. Install A/C compressor to front bracket with three bolts. Finger tighten bolts.
19. Install A/C compressor to rear bracket with three bolts. Tighten front and rear bolts.
Front bolts:
Torque: 49 N.m (36 ft-lbs)
Rear bolts:
Torque: 25 N.m (19 ft-lbs)
20. Connect A/C compressor clutch electrical connector.
21. Install accessory drive belt.
22. Start engine and engage A/C compressor 10-15 cycles to brake-in new A/C compressor clutch. This cycling of the A/C compressor will match
drive plate and pulley surfaces.