SC2 L4-1.9L DOHC VIN 7 (1996)
assembly, into roof structure.
Torque: 2 N.m (17 in-lbs)
7.
Install dome lamp lens by positioning to dome lamp assembly and snapping into place.
IMPORTANT:
If removal of the dome lamp lens is necessary after dome lamp assembly has been secured with the self-tapping screw, refer to the following
procedure.
Dome Lamp Lens Removal
1.
Hold dome lamp assembly stable with hand.
NOTICE:
Make sure screwdriver blade is inserted between the dome lamp lens and the dome lamp assembly. Exerting pressure on the headliner may damage it
and will not aid in removal of the dome lamp lens.
2.
Insert a small flat blade screwdriver into slot on side of dome lamp assembly.
3.
Exert pressure, then twist the screwdriver to unsnap the dome lamp lens from the retaining tab on dome lamp assembly.
Dome Lamp Lens Installation
1.
Place dome lamp lens to dome lamp assembly.
2.
Applying light pressure, press dome lamp lens in place.
PARTS REQUIREMENTS:
11509339
Screw - Self-Tapping
CLAIM INFORMATION:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System as shown.
Labor
Case
Operation
Type
Description
Code
Time
VW
Install Screw to Retain Dome
T9718
0.2 hrs
Lamp to Headliner