Sky L4-2.4L (2007)
Remove the seal and dry out the retainer. Reseal with Kent seam sealer P/N 10200.
Condition # 19
The customer may comment that the carpet is wet in the rear of the trunk.
Cause
The wiring harness rubber housing end may not be seated to the body.
Correction
Clean the rubber boot with a non-oil based cleaner and apply a bead of weatherstrip adhesive around the hole and reinstall the boot into the body.
Condition # 20
The customer may comment that the carpet is wet in the rear of the trunk.
Cause
There may be a void in the sealer at the rear of the trunk. Refer to the arrows in the illustration above.
Correction