Sky L4-2.4L (2007)
6. After installing the top, cycle the convertible top assembly to verify that there is no contact between the wear clip and the 1-2 bow. If contact is
made, proceed to Step 7. If not, proceed to Step 8.
7. If the wear clip comes in contact with the 1-2 bow, remove it and then measure and cut 5 mm (1/4 in) off the end and reinstall.
8. Apply GM weatherstrip lubricant or dielectric silicone grease to the area shown in the illustrations above.
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table above.
Disclaimer