saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Radiator Drain Plug|Service and Repair|Page 3904 > < Heater Inlet Hose Replacement (LE5)|Page 3899
Page 1
background image

Radiator Drain Plug: Service and Repair

Radiator Drain Cock Replacement

Caution:  With a pressurized cooling system, the coolant temperature in the radiator can be considerably higher than the boiling point of the
solution at atmospheric pressure. Removal of the surge tank cap, while the cooling system is hot and under high pressure, causes the solution to
boil instantaneously with explosive force. This will cause the solution to spew out over the engine, the fenders, and the person removing the cap.
Serious bodily injury may result.

Removal Procedure

1. Raise and support the vehicle. 
2. Place a drain pan under the right side lower radiator mount.

Important:  Coolant will drain from the right radiator mounting pin.

3. Loosen the radiator drain cock.
4. Remove the drain cock from the radiator after the coolant is done draining.

Installation Procedure

Radiator Drain Plug|Service and Repair|Page 3904 > < Heater Inlet Hose Replacement (LE5)|Page 3899