Sky L4-2.4L (2007)
^
Working clockwise around the chain, place the chrome link (4) in line with the timing mark (3) on the balance shaft drive sprocket.
(approximately 6 o'clock position on the sprocket)
^
Place the chain (7) on the water pump drive sprocket. The alignment is not critical.
^
Align the last chrome link (6) with the timing mark (1) on the exhaust side balance shaft drive sprocket.
Notice: Refer to Fastener Notice.
4. Install the upper balance shaft drive chain guide and bolts.
Tighten the bolts to 15 N.m (11 lb ft).
5. Install the small balance shaft drive chain guide and bolts.
Tighten the bolts to 15 N.m (11 lb ft).
