Sky L4-2.4L (2007)
Muffler: Service and Repair
Muffler Replacement (LE5)
Removal Procedure
1. Open the hood.
2. Remove the connector position assurance (CPA) retainer.
3. Disconnect the heated oxygen sensor (HO2S) electrical connector (3).
4. Raise and suitably support the vehicle.
Important: The HO2S uses a permanently attached pigtail and connector. This pigtail should not be removed from the sensor. Damage
or removal of the pigtail or connector will affect proper operation of the sensor.
5. Remove the HO2S (2).