Sky L4-2.4L (2007)
14. Remove the pipe clips (1) from the following:
* Floor panel number 4 cross bar
* Rear carrier bracket
* Right hand brace floor panel tunnel
15. Remove the pipe clip (2) from the floor panel rear reinforcement.
16. Have an assistant support the fuel feed, EVAP, and brake pipe assembly.
17. Remove the pipe clip (1) from the underbody side rail.
18. Remove the pipe clip (2) from the floor panel tunnel brace stud.
19. Remove the pipe clip (3) from the floor panel tunnel brace stud.
20. Remove the pipe clips (4) from the floor panel studs.
21. Remove the fuel feed, EVAP, and brake pipe assembly from the vehicle and place on a suitable work surface.