Sky L4-2.4L (2007)
7. Remove the fill pipe ground strap bolt (2).
8. Disconnect the fuel tank fill evaporative emission (EVAP) line quick connect fitting (3).
9. Loosen the fuel fill pipe hose clamp (1) at the fuel tank.
10. Separate and remove the fuel fill pipe hose assembly.
11. Cover or plug the fuel tank opening and the EVAP line in order to prevent fuel loss and/or system contamination.
Installation Procedure
1. Remove the cover and/or plug from the fuel tank opening and the EVAP line.
2. Install the fuel fill pipe hose assembly.
Notice: Refer to Fastener Notice.
3. Tighten the fuel fill pipe hose clamp (1) at the fuel tank.
Tighten the clamp to 2.5 N.m (22 lb in).