Sky L4-2.4L (2007)
4. Insert the J38125-561 tool into the 2 cavities on each side of the terminal at the front of the connector and push until you feel the tool disengage
the terminal retainers. See the release tool cross reference in the Reference Guide of the J44020 Terminal Repair Kit to ensure that the correct
release tool is used.
5. Carefully pull the terminal out of the connector. Always remember never use force when pulling a terminal out of a connector. If the terminal is
difficult to remove, repeat the entire procedure.
Terminal Repair Procedure
Use the appropriate wire assembly repair kits available through Saturn Service Parts.
Bosch Connectors (ECM)
Bosch Connectors (ECM)
Tools Required
J-38125Terminal Repair Kit
Removal Procedure
1. Locate the assist lever on the top of the connector. Move the assist lever to the forward position.