Sky L4-2.4L (2007)
5. Install the clutch hose/pipe assembly (1) to the clutch hose/pipe retainer bracket (2).
6. Install the clutch hose/pipe assembly retainer clip (2) to the clutch master cylinder.
Important: Ensure that the clutch hose/pipe locks securely in place.
7. Connect the clutch hose/pipe assembly (3) to the clutch master cylinder.
8. Connect the clutch hose (1) to the clutch master cylinder and brake master cylinder reservoir.
9. Fill the brake/clutch reservoir with DOT 3 hydraulic fluid to the proper fluid level.
10. Bleed the clutch hydraulic system. Refer to Hydraulic Clutch Bleeding.
11. Remove the shop towel and discard in a suitable container.