Sky L4-2.4L (2007)
![background image](/saturn/sky/l4-2.4l/Page-1257001.png)
Input Shaft: Service and Repair
Transmission Input Shaft Bearing Retainer Replacement
Removal Procedure
1. Remove the transmission from the vehicle.
2. Drain the transmission fluid. Refer to Transmission Fluid Replacement.
3. Remove the clutch actuator cylinder.
4. Remove the input shaft bearing retainer bolts.
Discard the bolts
5. Remove the input shaft bearing retainer.
6. Clean and inspect the input shaft bearing retainer.
Installation Procedure