SL L4-1.9L DOHC VIN 7 (1992)
27.
Attach the air bag Off display assembly (or assemblies) ground wire ring terminal(s) to the H-brace along with blower motor ground. (Refer to
illustrations.)
28.
Connect the air bag Off display assembly (or assemblies) connector to the air bag On-Off switch connector(s). If more than one air bag On-Off
switch is installed, make sure to connect correct air bag Off display assembly connector to the appropriate air bag On-Off switch assembly wiring
connector.
^
Driver switch Off display connector is Green.
^
Passenger switch Off display connector is Red.