SL L4-1.9L DOHC VIN 7 (1992)
Shift Cable: Service and Repair
Removal
SHIFT SELECTOR CABLE
REMOVAL
1. Remove air induction system. On DOHC (LLO) engine lift resonator upward to release it from the engine support bracket.
2. Remove small retainers at cable ends.
3. Disconnect the cable ends from the shift control housing.
4. Remove large cable to clutch housing retaining clips.
NOTICE: Do not drag cable boot through bracket hole as boot damage may occur.
5. Lift cable out of clutch housing bracket.
6. Remove console.
7. Remove shifter control assembly.