saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Wipers/Washers - Production Change Information|Page 9462 > < Windshield Washer Pump|Diagrams
Page 1
background image

Technical Service Bulletin # 92-T-42

Date: 920901

Wipers/Washers - Production Change Information

NO.: 92-T-42

DATE: September, 1992

GROUP: Body

CORP.NO.: 289008

Subject and Models Affected

SUBJECT:
Information on New Windshield Washers Mid-Year Product Change

MODELS AFFECTED:
All 1992 Saturns built from, and including VIN NZ251190.

Purpose

The purpose of this bulletin is to provide technical information on the changes made to the windshield washers and service procedures for the new
design. The windshield washer nozzles have been moved from the hood to the shroud top vent grille assembly to improve the wash of the windshield.
The part number for the new nozzles is 21049096.

Washer Nozzle Removal and Installation

Removal

1.

Remove shroud top vent grille. Refer to "Shroud Top Vent Grille Removal" procedure in the "Front End" section of the "Body/Collision Repair
Service Manual."

2.

Disconnect washer fluid hose from vent grille.

3.

Disconnect washer fluid hose from washer nozzle.

4.

Pinch attachment fingers on bottom of nozzle and remove nozzle.

Installation

Wipers/Washers - Production Change Information|Page 9462 > < Windshield Washer Pump|Diagrams