SL L4-1.9L SOHC VIN 8 (1997)
3. Lubricate pin boots with silicone grease.
4. Install lock pin boot into caliper support.
NOTE:
^
Make sure lock pin boot passes all the way through caliper support.
^
Use lock pin as a tool to assist installation.
5. Install guide pin boot onto caliper body.
6. Install caliper body onto caliper support.
CAUTION: Be careful not to damage piston, guide pin, or lock pin boots.
NOTE: Compress pin boots by hand as caliper moves into position.
7. Lubricate straight section (not threads) of lock pin and guide pin with silicone grease.
CAUTION: Make sure guide and lock pin boots are properly aligned prior to pin installation, or boot damage may occur.
8. Install lock and guide pins.
^
Torque to 36 Nm (27 ft. lbs.)
CAUTION: Be sure that front brake hose is routed as shown with loop to the rear. Be careful not to install front brake hose with a twist. Incorrect
front brake hose installation could bring hose into contact with wheel. Brake failure could result.