SL L4-1.9L SOHC VIN 8 (1997)
3. Lubricate new piston seal with clean brake fluid and install seal into caliper seal groove.
NOTE: Make sure seal is not twisted.
4. Install lubricated piston boot onto piston.
5. Lubricate outside diameter of piston with clean brake fluid.
6. Install piston into caliper body. Push piston all the way to the bottom of the caliper bore.
CAUTION: Considerable force may be required to install piston.
7. Install boot ring.
a. Make sure that the outside edge of the piston boot is smoothly seated in counterbore of caliper body.
b. Work boot ring into groove near open end of caliper bore utilizing care not to pinch piston boot between boot ring and caliper body.
c. After installing boot ring, lift inner edge of piston boot to release any trapped air. The boot must lie flat, below the level of the piston face.
