SL L4-1.9L SOHC VIN 8 (1997)
Coolant Reservoir: Service and Repair
REMOVAL
WARNING: To avoid the danger of being burned, do not remove the cap while the engine, radiator, and surge tank are still hot. scalding
fluid and steam can be blown out under pressure.
1. Drain the cooling system by opening the drain valve at the bottom of the radiator. Collect the fluid in a container.
2. Remove the pressure cap.
3. Remove surge tank screws. Move washer fluid bottle off to the side.
4. Disconnect the electrical harness from the low coolant sensor.
5. Remove the clamps from the vent hose and the heater return pipe hose. Disconnect hoses.