SL L4-1.9L SOHC VIN 8 (1997)
present on valve stem and on top of guide.
2. Oil the valve guide and valve stem with clean engine oil. Install valve stem oil seal with installation tool SA9102E.
CAUTION: If a valve stem seal is removed after it has been installed, it must be discarded. The valve stem lock groove will cut the seal's lip
during removal. Use extreme care when installing valve seals; do not damage valve stems.
3. Install valve spring and cap.
CAUTION: Use extreme care when installing valve spring retainers and do not scratch the valve stem.
4. Compress valve spring and install retainers.
5. Remove service tool SA9124E and spark plug adapter.
6. Install rocker arm assemblies, rocker cover, spark plugs and wires.