SL L4-1.9L SOHC VIN 8 (1997)
12.
Slide bolt, socket and extension through 17 mm or 11/16 in. hole created in a previous step. Slide the bolt through the opposite hole in the inside
of the midrail and through the hole in the damper kit's upper bracket.
13.
Install M8 nut onto bolt and tighten.
Torque: 30 N.m (22 ft-lbs)
14.
Using 3M(R) WINDO-WELD Primer (Black) (P/N 08643) or equivalent, prime edge of 17 mm or 11/16 in. hole enlarged in outside of midrail.
15.
Install road wheel.
Torque: 140 N.m (103 ft-lbs)
16.
Lower vehicle from hoist.