SL L4-1.9L SOHC VIN 8 (1997)
6. Position lever assembly over valve spring to be removed and use 1/2 inch breaker bar to compress the spring.
7. Remove valve spring cap retainers and release spring tension.
8. Remove cap and spring.
9. Remove valve stem seal using seal removal tool SA9102E-A.
INSTALLATION
CAUTION: Before each valve stem seal is installed, lubricate the valve stem with clean engine oil and guide. If a valve stem seal is removed, it
must be discarded.
1. Inspect valve stem for scratches, scores and scuffs. Spray the valve stem and guides with clean lubricating oil to remove any debris that may be
