SL L4-1.9L SOHC VIN 8 (1997)
Remote Control Door Lock (RKE) Module Installation
5. Raise rear seat back.
6. Install rear seat carpet retainer molding.
Remote Control Door Lock (RKE) Module Installation
7. Position seat cushion rear edge onto rear compartment ramps. Route seat belt buckles through the rear cushion slots assuring that the buckles are
not twisted or stuck beneath the seat cushion.
8. Align the seat frame wire with the rear compartment lower retainers and push rearward while pushing downward to secure the seat frame wire into
retainers. Pull up on cushion to verify that it is secure.
