SL L4-1.9L SOHC VIN 8 (1997)
8. Install I/P upper trim panel screws.
9. Install I/P bolt cap.
10. Reprogram the Electrically Erasable Programmable Read Only Memory (EEPROM) using the Saturn Service Stall System (SSS).
NOTE: The ABS control module contains an EEPROM that must be reprogrammed when a service replacement module is installed or a DTC 82
will result. (The ABS service replacement module will have a DTC 82 in it from the factory and can only be cleared by reprogramming the ABS
control module with the correct calibration.)
