SL L4-1.9L SOHC VIN 8 (1997)
10. Inspect for proper alignment and seating of all clips.
11. Turn instrument panel cluster assembly over and carefully place face down. Make sure that the terminals (crimped to the flex PCB) are fully seated
in the black connectors at the speedometer and tachometer connections. Carefully align and seat connectors at tachometer (if removed) and
speedometer. Do not use unnecessary force to install, making sure to check for obstructions and proper alignment. Do not bend connectors more
than necessary for installation.
IMPORTANT: If the connector is difficult to install, pinch the crimped section of the flex between your thumb and forefinger and gently bend the
connector away from the crimp to a 30 to 40 degree angle.
12. Seat tachometer flex PCB tab into housing slot under tachometer.
13. Inspect that all gages and clips are seated correctly and that there is no debris or markings on the lens or dial faces.
