SL L4-1.9L SOHC VIN 8 (1997)
Fluid Pan: Specifications
Fluid Draining
NOTE: The fluid filter is NOT located under the valve body cover. The fluid filter is a spin-type located on the outside of the transaxle. The
transaxle fluid is drained through a drain plug.
Valve Body Cover
^
When installing the valve body cover, make sure to properly torque the valve body cover bolts using the torque sequence shown.
-
Torque: 12 N.m (106 inch lbs).
IMPORTANT: Clean and lubricate fasteners with Transaxle Fluid. Wipe off excess fluid and install.
^
Verify torque of the valve body cover bolts to account for gasket relaxation using the torque sequence shown.
-
Torque: 12 N.m (106 inch lbs).