SL L4-1.9L SOHC VIN 8 (1997)
The two illustrations illustrate the differences between the first and second design torque converter housings. The illustration below, illustrates the
differences between the first and second design oil pump wear plates.
IMPORTANT:
The second design oil pump wear plate can be used with both first and second design torque converter housings. The first design oil pump wear plate
can only be used with a first design torque converter housing.
^
A service Torque Converter Housing Kit (P/N 21005943) has been released for servicing 1992-1996 vehicles. This kit contains a second design oil
pump wear plate and a first or second design converter housing.
^
When servicing the transaxle oil pump on a 1992-1995 vehicle, the automatic transaxle oil pump assembly (P/N 21003133), which contains a 1st
design oil pump wear plate, should be used.
^
When servicing the transaxle oil pump on a 1996-1997 vehicles, the automatic transaxle oil pump assembly (P/N 21003328) is required. This oil
pump assembly contains a second design oil pump wear plate.
Vehicles built in the 1997 model year have the second design torque converter housing and oil pump wear plate and do not require the torque converter
housing kit, if the torque converter housing is being replaced.
PARTS REQUIREMENTS:
P/N
Description
Usage
21005943
Housing Kit-T/CV
1992-1996 Vehicles