SL L4-1.9L SOHC VIN 8 (1997)
5. Tighten the bolts using a progressive crisscross pattern to prevent warping of the cover stamping.
-
Torque: 25 N.m (18 ft. lbs.).
IMPORTANT: When tightening the pressure plate bolts, do not tighten any one bolt more than half a turn at a time or the pressure plate cover
may warp.
6. Remove clutch alignment tool from clutch disc.
7. Install clutch fork stabilizer and ball stud if removed.
-
Torque: 24 N.m (18 ft. lbs).
8. Install fork retainer to clutch fork.
NOTICE: Do not lube the release bearing or bearing quill.
9. Install release fork and bearing to transaxle by snapping fork onto ball stud.
10. Lube fork pivot point with high temperature grease (P/N 21005995) or equivalent and install release bearing to release fork.
