SL L4-1.9L SOHC VIN 8 (1997)
Transmission Mode Switch: Testing and Inspection
-
Connect Scan tool, ignition On/engine Off. Select general information from TCM menu. Scan tool should indicate position of switch.
-
Tool display should change when going from Perf to Norm modes.
-
The PCM supplies 12 volts to terminal JlD10 (Circuit 553). When Perf is selected, the switch will ground circuit 553.
-
If the Scan tool always reads Perf, regardless of switch position, check for a grounded circuit 553. If switch always indicates Norm, check for an
open in circuit 553.