SW L4-1.9L DOHC VIN 7 (1993)
7.
Use a right angle pick or cotter key removal tool to scrape along inside edge of plenum drains to remove any urethane sealant. Once urethane
sealant is removed, re-check drain slot with wire to ensure drain is open.
2001 VEHICLES ONLY.
8.
Remove air inlet screen on right side of vehicle.
9.
Clean surface with 100% isopropyl alcohol and allow to dry.
10.
Replace air inlet screen with P/N 21031308.
PARTS REQUIREMENTS:
CLAIM INFORMATION: