SW L4-1.9L DOHC VIN 7 (1993)
22.
Make the following splices (refer to electrical wiring schematic shown).
22.1 At terminal F7 of IPJB black 46-way connector, splice ORN wire from delayed blower motor control module into ORN wire (circuit
340A-battery feed) from 46-way connector.
22.2 At terminal B of IPJB black 6-way connector, splice RED wire from delayed blower motor control module into BRN wire (circuit
50-ignition) from 6-way connector.
22.3 At terminal D of IPJB black 6-way connector, locate ORN wire (circuit 52-HVAC blower control switch), and cut wire 51 mm (2 in.) from
6-way connector, then:
^
Splice BLK/ORN wire from delayed blower motor control module to length of ORN wire (circuit 52) that goes to black IPJB 6-way
connector.