SW L4-1.9L DOHC VIN 7 (1993)
IMPORTANT:
On 1995-1998 model year vehicles, place I/P compartment facing down, position template on top surface of I/P compartment, and mark location of
all air bag on-off switch mounting and wire routing holes.
13.
For 1995-1998 model year vehicles:
^
Place I/P compartment facing down and position template provided with kit on the top surface of the I/P compartment.
(1) Template (2) I/P Compartment
IMPORTANT:
If only one air bag on-off switch is to be installed, install the air bag on-off switch on the left side of the I/P compartment to allow easy access for the
driver of the vehicle.
^
If installing only one air bag on-off switch:
-
Locate and drill one 1-1/4 in. (32 mm) hole in I/P compartment upper rear surface for air bag on-off switch wiring.
-
Locate and drill two 13/64 in. (5 mm) holes in I/P compartment upper rear surface for air bag on-off switch mounting.
^
If installing both air bag on-off switches:
-
Locate and drill two 1-1/4 in. (32 mm) holes in I/P compartment upper rear surface for wiring of air bag on-off switches.
-
Locate and drill four 13/64 in. (5 mm) holes in I/P compartment upper rear surface for mounting of air bag on-off switches.
14.
Assemble air bag on-off switch (or switches) to mounting bracket(s) using two Phillips head screws for each air bag on-off switch.