SW1 L4-1.9L SOHC VIN 8 (1996)
4. Install upper trim panel insulator.
IMPORTANT: Make sure to tuck in all flaps.
Installing Upperdash Trim Panel
5. Install upper trim panel into clips at base of windshield.
IMPORTANT: Be careful when removing or replacing upper trim panel not to damage VIN plate.
6. Lower panel and push down at clip locations to secure.
Upper Dash Trim Panel
7. Install and tighten screws.
8. Install screw caps.
Dash Trim Panel Removal
9. Install upper trim panel extensions by pushing down at clip and dual-lock locations.
10. Install AIR BAG fuse to I/P junction block.
11. Turn ignition switch to the RUN position and verify that the AIR BAG warning lamp flashes seven times and then turns Off.
