SW1 L4-1.9L SOHC VIN 8 (1996)
9.
Inspect seal groove for damage, replace as required.
Assemble
1.
Install bleeder valve.
2.
Lubricate piston seal using clean brake fluid, then install, ensuring seal is not twisted.
3.
Install lubricated piston boot to piston.
4.
Install lubricated piston to body, push piston to bottom of bore.
5.
Install boot ring, ensure piston boot outer edge is smoothly seated in counterbore, work boot ring into groove near open end of caliper bore. Do
not pinch piston ring between boot ring and body.
6.
Lift piston boot inner edge to release trapped air, then install caliper and Bleed Brake System. See: Brake Bleeding