SW1 L4-1.9L SOHC VIN 8 (1996)
Valve Cover: Service and Repair
1. Remove fasteners.
2. Remove cam/rocker cover procured RTV bead entirely when gasket replacement is necessary.
NOTE: Inspect the cam/rocker cover isolators for cracks. Replace the isolators if deterioration exist. It is not necessary to replace the gasket
every time the cover is removed. A small drop of RTV must be added to the T-joints when assembled.
3. A small 5 mm (0.20 inch) bead of RTV must be installed at the two T-joints whenever the cam/rocker cover is installed.
