SW1 L4-1.9L SOHC VIN 8 (1996)
Engine Mount: Service and Repair
Fig. 2 Engine Mount To Midrail Bracket Removal.
Fig. 3 Engine Mount Separation From Front Cover.
1. Remove two engine mount to midrail bracket attaching nuts, Fig. 2.
2. Position a floor jack under oil pan. Using a block of wood between pan and floor jack, raise engine enough to unload mount.
3. Remove three engine to front cover attaching nuts, Fig. 3. , then remove engine mount.
4. Reverse procedure to install. Tighten mount to midrail bracket and engine mount to front cover attaching nuts to Specifications. See:
