SW1 L4-1.9L SOHC VIN 8 (1996)
2.
Remove screw and heater core side cover located above the accelerator pedal.
IMPORTANT:
Heater core clamp kit contains the heater pipe clamp, fastener and the heater core retainer. The heater core retainer will not be needed for this
bulletin.
3.
Install heater core pipe clamp (P/N 21030351), to heater core pipes using the fastener with the kit as shown in the illustration.
Torque: 2 N.m (16 in-lbs)
4.
Fasten the clamp to the inside of the heater and A/C module case using screw (P/N 11515379).
Torque: 2 N.m (16 in-lbs)
5.
Verify the condition has been repaired.
