SW1 L4-1.9L SOHC VIN 8 (1996)
5.
Cut a small piece of insulator material (P/N 21040429) to 15.87 x 12.70 mm (5/8 x 1/2 in.), and apply to center support of the instrument cluster
back housing as shown in illustration.
IMPORTANT:
The insulator is released for the 1992-1996 upper I/P trim pad; however, it can be used for this purpose, when cut to the measurements given above.
6.
Reinstall tachometer assembly, making sure both locking tabs are fully seated.
7.
Install new speedometer/odometer assembly.
8.
Install instrument cluster assembly.
Parts Requirements
IMPORTANT:
For Canadian Retailers, the revised service parts can be identified by a label marked "R2," both on the shipping box and the speedometer head.
Claim Information