SW1 L4-1.9L SOHC VIN 8 (1996)
4. After adjustment, torque outer tie rod end jam nuts 74 ft. lbs.
5. Ensure seals do not become twisted.
6. Recheck toe angle.
CRADLE
Check cradle to body alignment at two alignment holes using 5/16 inch rod, Fig. 2. If cradle to body alignment is not correct, loosen cradle
fasteners and align cradle to body.
Cradle Alignment
Fig. 2 Cradle Alignment.
CRADLE
Check cradle to body alignment at two alignment holes using 5/16 inch rod, Fig. 2. If cradle to body alignment is not correct, loosen cradle
fasteners and align cradle to body.
