SW1 L4-1.9L SOHC VIN 8 (1996)
Oil Measurement
NOTICE:
Confirm the refrigerant recovery oil bottle on the refrigerant recovery station is empty prior to recovering refrigerant. If excessive oil is introduced to
the A/C system, decreased A/C performance will result.
1.
Remove A/C compressor from vehicle. (Refer to "Compressor" removal procedure in the "Service" section of the "HVAC Service Manual.")
2.
With A/C compressor on a clean bench, install high and low side A/C compressor oil drain adapters SA9149AC-6 and SA9149AC-5 on low and
high side ports.
3.
Drain oil into a clean dry container.
a.
Position A/C compressor to drain from high side port first.
b.
Move A/C compressor to different positions to remove all oil possible.
c.
Turn A/C compressor over to drain oil from low side port.
d.
Rotate A/C compressor drive plate in both directions to remove oil from A/C compressor chambers.
e.
Stop oil draining when oil coming from low and high side ports becomes only drops.
f.
Measure and record oil removed from A/C compressor.
g.
Discard removed oil as all new replacement (service) A/C compressors come with 65cc of Saturn PAG compressor oil installed.
4.
Place new A/C compressor on a clean work bench with high and low side ports in an upright position.
